|
L-3
PS has nearly 30 years history providing pulsed power
modulators for government and commercial applications
|
|
AVCO
Everett Research Laboratory
|
6 MW, 30 Hz, line modulator |
|
DARPA
|
50
Hz rep-rate , 250 W average power, KrF laser beam
modulator |
|
Maxwell
|
10
Hz-1500 Hz, up to 100 kV, 160 kW test modulator |
|
Math
Sciences Northwest
|
50
kV to 70 kV, 120 ns pulse width, 100 Hz magnetic
pulse compression modulator |
|
DARPA
|
100
Hz, 300 kW average power, magnetic switching modulator
(EMRLD) |
|
LLNL
|
LIS
Extractor 5.5 kV, 700 A peak, 60 kHz and 480 kW
average power solid-state modulator |
|
MDTI
|
Compact
3 kJ, 1.5 MV open circuit, 16 stage Marx bank storage
capacitor for a two-stage Guillemin Type A pulse
forming network achieved over 10,000 cumulative
shots at repetition rates of ~3 Hz |
|
VHSIC
|
10
Hz, four stage magnetic compression system, high
brightness soft X-ray source for X-ray lithography
… at the time, the highest peak and average
power magnetic modulator ever built (600 kA, 70
kV with 10 kJ of electrical energy per pulse and
an average power of 30 kW) |
|
LSU
|
10
Hz, 200 ns,120 A and 500 A, adjustable from 50 to
100% in amplitude, thyratron switched, kicker magnet
modulators |
|
University
of Utah
|
6
kA, 100 Hz solid state magnetic modulator |
|
HDL/ETDL
|
up
to 500 kV, 5 ohm, rise time of < 30 ns, flat
top pulse width of 500 ns, decay time of < 100
ns, and repetition rate of 5 Hz pulser |
|
|
